Home » Arc Spray Gun in Karnataka

Arc Spray Gun in Karnataka

An arc spray gun may be a different sort of the arc which deposits a coating on the inside and external surface of a part of any geometry. it's mostly used for coating on the cylinder bores of an engine. It allows the employment of an aluminum cylinder block externally having heavy cast iron sleeves. An arc is used to melts the wire that's a supersonic plasma jet. This plasma set by given an arc between a non-consumable cathode and wire which is required for coating.

Arc Spray Gun in Karnataka
Product Details:
₹1 Lakh - 4 Lakh

Applications/Usage Industrial
Air Pressure 50-70 psi
Nozzle Size 2 mm
Air Consumption 9-10 cfm
Air Inlet 3/8"
Minimum Quantity 1 Piece

  • During construction projects, shot blasting is also used to clean the outer walls, roads, and floors.
  • Shot blasting is often used to clean tanks and pipes underwater before coating or recoating them to stop corrosion.
  • ShipYard and ShipBuilding.
  • aircraft maintenance and aerospace.
  • Foundry for iron, steel, and other metals.
  • The casting of aluminum.
  • Forgings.
  • Rail.
  • Foundries.
  • fabrication of steel.
  • Car and bus murals.
  • Wheel cleaning for alloys.

Arc Spray Gun

The arc spray gun manufacturer process needs a heat cause to dissolve the coating feedstock; though, it's different in that it takes to not employ process gases to make the heat source. The thermal spray gun process utilizes two metallic wires, normally of a similar organization, as the coating feedstock. The two cords are electrically required with opposing polarity and are supplied into the arc gun at balanced, controlled speeds. When the wires are brought collectively at the contact point, the competitive charges on the wires produce an arc that continuously dissolves the tips of the zinc wire. Compressed air is used to atomize the now molten substance and stimulate it onto a suitably prepared workpiece surface to create the coating.

Arc Spray Gun process

In an arc spray gun process, the importance of coating which will be deposited per unit of your time is instantly associated with the output amperage of the method and therefore the density and freezing point of the metalizing wire. Some thermal spray coating process requires a device to cool the spray gun, other processes may require heaters. Heating equipment precisely controls the movement of the gun & workpiece.

There are peripheral components that can be divided into four categories: Safety components & warning detector of a gas leakage; Environmental components sort of a soundproof cabin, also as an air cleaner and fan to protect the operator from highly metalized metal. The coatings provided in the twin wire arc spray gun manufacturer method usually have a greater porosity and lower adhesion intensity than those received from other thermal spray processes, making them of comparatively poorer property. But, for a few purposes, higher measures of porosity are acceptable or maybe desired. Twin arc spray gun features a comprehensive range of commercial purposes, categorized consistent with various wire elements and coating diameters.

Arc Spray Guns Properties

  • It involves a variety of metallic alloys and pure metals for reparation, corrosion coatings, and many other designs.
  • Wire coating elements are both solid or cored (filled) wires, maximizing purpose potential.
  • The almost cool method allows coatings to be applied to plastics, composites, glass beads, etc.
  • Great portability for on-site coatings.

Applications of Arc Spray Gun

  • Manufacture components that exhibit specific surface characteristics.
  • Use less costly substrate materials for components, yet maintain high-performance surface properties.
  • Improve component service life.
  • Repair existing components to like-new or better than new condition.
  • Salvage mismachined components.
  • Provide a high-performance bond coat in a coating system. 

Industrial Uses

  • Oil/Gas / Petrochemical.
  • Paper/Printing.
  • Steel/Metal Production.
  • General Industry.
  • Glass /Optics.

Arc Spray Gun Exporter in India

We can provide all solutions for Arc Spray processes Flame Spray Guns with the application needed for the arc spray coating. We also export Sand Blasting Machine, Shot Blasting Machine, Blast Room, Sand Blasting Nozzle at a low price. We have proven reliable & promising to our customers for what we offer a complete package of  Arc Spray Equipments. Our focus is to improve the  Arc Spray Gun in terms of Efficiency of spraying, Proficiency coating, etc. Some of the parameters we are still working to provide full flesh solutions towards the  Arc Spraying techniques.

  • Delivery Time- Minimum Time
  • Port Of Dispatch- Thar Dry Port
  • Production Capacity- 2-3 Per Month
  • Packaging Details- Box
  • Payment Terms- L/C (Letter of Credit)/T/T (Bank Transfer)
+918094701127