Home » Thermal Spray Gun in Bangladesh

Thermal Spray Gun in Bangladesh

The thermal spray gun manufacturer is used for coating purposes in this technology thickness of 22 microns to several mm thick coating is sprinkle and it depends on feedstock.

Thermal Spray Gun in Bangladesh
Product Details:
₹1 Lakh - 4 Lakh

Air Pressure 70-100 psi
Nozzle Size 3.15 mm
Form Wire
Item Weight 15 kg
Air Consumption 8-9 cfm
Air Inlet 3/8"
Sound Pressure 115 dB
Usage/Application Flame

  • During construction projects, shot blasting is also used to clean the outer walls, roads, and floors.
  • Shot blasting is often used to clean tanks and pipes underwater before coating or recoating them to stop corrosion.
  • ShipYard and ShipBuilding.
  • aircraft maintenance and aerospace.
  • Foundry for iron, steel, and other metals.
  • The casting of aluminum.
  • Forgings.
  • Rail.
  • Foundries.
  • fabrication of steel.
  • Car and bus murals.
  • Wheel cleaning for alloys.

Thermal Spray Gun is utilized for covering measures in which dissolved materials are sprayed on a superficial level to give better cleaning and eliminate unfamiliar particles. Thermal spray guns give thick coatings up to a few mm relying upon the application. Covering materials accessible for thermal spraying incorporate metals, amalgams, earthenware production, plastics, and composites. The coal thermal spray guns are utilized for covering measures in which softened materials are sprayed on a superficial level to give better cleaning and eliminate unfamiliar particles.

Thermal Spray Gun Working

The thermal spray gun is utilized to improve the metal surface. The primary motivation behind utilizing a thermal spray gun manufacturer is the development of the turning shaft and expanding the life of machines. 

The thermal spraying strategy can concoct thick covering over a huge territory at a high deceleration rate when contrasted with all the more covering measures. The thermal spray gun manufacturer softens the material which brings about liquid beads quickened in a gas stream that is projected against the surface to be covered. Liquid material causes in holding fast to the particles, covering, and interlocking.

Types of thermal spray gun manufacturer :

Flame spray gun manufacturer

The flame spray gun is for the most part used to spray liquid metal like zinc, copper, aluminum against the surface to upgrade the surface quality. It is a sort of warm spraying. The liquid material can be as wire or powder contingent upon the application. On the off chance that the zinc is sprayed, at that point it will be called zinc spray gun, if the copper is sprayed it will be called copper spray gun comparatively, for aluminum it will be called as an aluminum spray gun. Inflame spray guns, covering wire or powder are first softened in the gun then it gets atomized with the assistance of compacted air and stores on a superficial level. The liquid metal drops set on the outside of the substrate. It is the easiest among the most seasoned sprays measures. A flame spray gun additionally gives erosion safe coatings and furthermore offers a scope of spray boundaries for incredible inclusion rates and best quality surface completion.

Wire flame spray gun manufacturer

Wire flame spray gun utilizes an oxy-fuel flame to liquefy the wire-totally. After the malting cycle, the dissolved metals atomized with the assistance of packed air so a spray stream can be made that can be applied on a superficial level for the covering reason. In a wire flame spray gun, the wire is taken care of into the front light of flame spray through the turbine which is air driven. Mostly fuel gases like acetylene, LPG, Propene, and oxygen is blended appropriately in the siphon plug head get together which gives a source to burning.

High-velocity oxy-fuel spray gun manufacturer

The high-velocity oxy-fuel spray gun is utilized for treating a lot harder, more wear, and destructive surface. A combination of fluid fuel and oxygen is taken care of into a burning chamber, where they lighted persistently. The resultant hot gas exuded through a meeting wandering spout in a straightway. The flood of the hot gas and powder is guided towards the surface to be covered. The powder softens incompletely and stores on the substrate. The subsequent covering has low porosity and solid bond strength.

Arc spray gun manufacturer

Arc spray gun utilizes an electric arc to liquefy wires. This cycle is generally utilized for hefty covering of metallic on a surface. The shed material is then atomized with the assistance of packed air to make a spray stream that is applied on a superficial level on which covering is expected to frame. Arc spray guns can be applied to both enemies of erosion and designing coatings. Arc spray guns are viewed as simple to work and furthermore to computerize. Arc spray gun utilizes two consumable wire of metal to take care of the gun. These wires are charged to frame an arc between them. The warmth from this arc dissolves the wire of metal. The liquid metal entrained in the air fly from the gun. Arc spray covering stores on the work-piece with the assistance of compacted air.

Plasma flame spray gun manufacturer

Plasma fire spray gun is utilized for both huge surfaces just as little inward bore widths surface coatings. Plasma spray measure incorporates the spraying of liquid or warm mollified materials onto a surface to give a covering. Plasma spray gun creates adequate energy to liquefy practically any material in powder structure makes them appropriate for an enormous assortment of surface coatings. Materials as powder are infused into an extremely high-temperature plasma fire, where they are warmed and quickened to a high speed. This hot material affects the substrate surface and quickly cools framing a covering. Plasma spray coatings are a lot denser and cleaner than the other warm spray measures except for HVOF.

The main feature of the thermal spray gun manufacturer

  • Increase the life of machines
  • Provide excellent finish
  • Resist corrosion
  • Reliable and efficient
  • Economic and long-lasting
  • Performance is high

Thermal Spray Gun Manufacturer in India

We manufacture the best-designed models for thermal spray gun as per their applications. The prices of thermal spray gun are within the budget of the customers, they can afford them easily. From ordering to delivering, Blast rooms give assurance of providing the best service. The thermal spray guns available here are capable of working on any type of work-piece geometry. 

+918094701127